The new SMART UI 3.0
1st, The Side-Switch with 2 main functions.
1. Click to power ON/OFF
The STRIVE always remember the last output
Each click to simply power ON or OFF without annoying cycling the output.
2. Hold to change mode.
By holding the switch, you can select the output and the STRIVE will remember it when you release the switch.
The sequence of output as :
100%, 40%, 10%,1%, 14Hz strobe, SOS.
2nd, The Thread-Lock and Instant MAX functions
The tail cap of STRIVE with thread-lock features, just release it by 1/10th turn to lock the device from power activation.
At any level of output being use (power ON), just release the tail and tightenit again will restore the STRIVE memory to 100% output, and a click to the side-switch will power up the STRIVE at MAX output.
LED : CREE XM-L2 U2 Cool White
Reflector : SMO type
Output : max. 800+ lumens (100%, 40%, 10%, 1%, 14Hz strobe, SOS)
Runtime 1 (minutes) : 100 (Ultra) , 280 (High) - (18650 @ 3000mAh)
Runtime 2 (minutes) : 1200 (Med), 15000 (Low) – (18650 @ 3000mAh)
Batteries : rechargeable Li-ion 18650, (not included)
Length : 119mm (standard battery tube)
Bezel Diameter : 33mm
Body Diameter : 24.5mm
Tail Diameter : 25.8mm
Weight : 108g, (standard battery tube) - (without battery installed)
Material : T6061 aircraft aluminum
Body coating : Type III HA Black
Accessories : spare o-rings, lanyard, holster.